IOX Management
IOX appears not to be enabled on the device at this moment. IOXVM generally takes 5-6 minutes to be up and running. If IOX configuration is already done, the user is recommended to try refreshing or revisiting this screen after that interval.
For IOX Device Manager access to work, the LAN Zone should have Vlan interfaces along with the IOX Interface. Navigate to Zones screen.
Unable to determine Guest OS version. Guest OS may be unsupported/incorrect version or installation may have had errors. IOX functions may not work properly. Click here to upgrade Guest OS.
  • IOX Device manager is external to Cisco Configuration Professional Express and will be launched in a separate window/tab.
  • Recommended minimum IOS version required for IOX support is 15.6(3)M2.
  • IOX features should be enabled for the user to gain access to the same. For this, the Guest OS should be running.
  • Boot time for IOXVM is approximately 5-6 minutes and user will get the IP Address of IOX only after the complete boot up.
  • Please refer the documentation regarding IOX support before proceeding with configuration.

Guest OS Functions
         

Guest OS Status
Guest OS Update
Select from: Router(flash:) Desktop

Select Guest OS File

Guest OS Files detected on router flash:
Boot
First in boot order Delete all entries in boot list
Apply

Download from CCO

Upload and Install

  • Please extract the downloaded zip file from CCO on your PC. If you already have the extracted Guest OS file available in your PC, then please skip this step.
  • Click on Select Guest OS file button and choose the Guest OS file from the folder where it is placed/extracted.
Upload Guest OS
Please do not refresh or navigate away from the browser.
Guest OS upload has failed.
Error Message: Guest OS file upload failed
Try Again
Go Back
Configure IOX
Enable IOX Access
For IOX to run, recommended minimum version of IOS is 15.6(3)M2.
Boot time for IOXVM is approximately 5-6 minutes. IOX will be enabled and accessible once IOXVM is up and running.
Use Default IOX Config Change IOX Config
 IOX Interface GigabitEthernet5 (192.168.1.1    255.255.255.0)
 IOX Pool Details ioxpool (192.168.1.0   255.255.255.0)
 Excluded Addresss 192.168.1.1 to 192.168.1.5
 Probable IOX Host IP Address 192.168.1.6
 External Access Interface Primary WAN  
Pool Name*:
Pool Network*:
Subnet Mask*:
Excluded Address Range (Start)*:
Excluded Address Range (End):
Default Router*:
IOX Host Address:
IOX Interface:
IOX Interface IP Address / Mask:
External Access Interface*: